QP Series

Fire Alarm Control Panel

Fire Alarm Control Panel
  Characteristics
  • Removable front board for easy maintenance.
  • Easy-to-clean front board is able to avoid dirt attached.
  • High luminance and long life span LED.
  • Build-in 24V power and battery charger.
  • Independent visual & audible indication for zone open/short fault.
  • Independent visual & audible indication for AC power & battery fault.
  • Visual & audible indication for sounder short circuit fault.
  • Buzzer silence with 3-mode operation feature.
  • Short circuit = Alarm feature (selected by JUMPER, applicable for manual call point w/o resistance).
  • Accurate supervision circuit for battery.
  • Day/Night Mode Selection. (Model. QP212, QP412)
  • System will back to normal automatically after alarm status is released. (Model. QP212, QP412)
  • Ground fault detection feature. (Model. QP212, QP412)
  • Fault Output (NO. NC. COM), Alarm Output (NO. NC. COM.), Zone Output. (Model. QP212, QP412)
  • 24V DC power output for external load. (Model. QP412)
  • Zone EOL resistor can be set from panel board. (Model. QP412)

  Specifications
Model QP112 QP212 QP412
Power Source 220V AC, 50/60Hz *Others also available
Battery Capacity 24V / 1.2Ah
Max. Output Current 1A 1.2A 2.0A
# of heat detector connected No limit *Except electronic-type
# of smoke detector connected 30/zone *Horing Lih manufactured
End of Line Resistor 4.7 kΩ
Material 1.2mm steel plate
Dimensions (mm) H x W x D 203 x 272 x 71

  Approval

  Download